Superflex
Cutting equipment
The SUPERFLEX can process and cut stock rebar at very high level of productivity and tolerance accuracy. It is based on a very strong and reliable heavy duty structure that can be managed by a single operator.
The SUPERFLEX is a travelling cutting bench that, aligning in the right position with the bundles holding rack, can be loaded with rebars and can cut fast and precise. The bench delivers as well the material onto intermediate conveyors, collecting racks or bending centers, depending on the production requirement and consequently of the “tailor made” lay-out. The modularity of a SUPERFLEX based plant, and in particular the possiblity to expand the lay-out at later stages, makes this unit of the most flexible solution in the cut and bend.
![](/img/asset/YXNzZXRzL3N1cGVyZmxleC0zMi00MF8wNy5qcGc=/superflex-32-40_07.jpg?w=550&h=350&fit=crop&s=582f80b300e86e21bdff61770f26f0ae)
Superflex 32
CUTTING PLANTS
BAR ∅32 mm
Fixed magazine
Manual or automatic bar loading
Simple and automatic management of the cut bars
System of the “Bundle clamp”
Use from a minimum of 2 up to a maximum of 4 motorized roller ways independent
![](/img/asset/YXNzZXRzL3N1cGVyZmxleC0zMi00MF8wNy5qcGc=/superflex-32-40_07.jpg?w=550&h=350&fit=crop&s=582f80b300e86e21bdff61770f26f0ae)
Superflex 40
CUTTING PLANTS
BAR ∅40 mm
Fixed magazine
Manual or automatic bar loading
Simple and automatic management of the cut bars
System of the “Bundle clamp”
Use from a minimum of 2 up to a maximum of 4 motorized roller ways independent